Page turning system

A device for holding reading materials for use by readers without arm mobility is presented. The device is adapted to hold the reading materials in position for reading with the pages displayed to enable turning by use of a rubber tipped stick that is held in the mouth and has a pair of rectangular frames. The frames are for holding and positioning the reading materials opened in reading posture with the pages displayed at a substantially unobstructed sighting position for reading. The pair of rectangular frames are connected to one another by a hinge so the angle between the frames may be varied thereby varying the inclination of the reading material. A pair of bent spring mounted wires for holding opposing pages of the reading material open for reading without substantial visual interference of the pages is mounted to the base. The wires are also adjustable to the thickness of the reading material and have a variable friction adjustment. This enables the force of the wires against the pages to be varied and permits the reader to manipulate the pages with the stick

Compliant joint

A compliant joint is provided for prosthetic and robotic devices which permits rotation in three different planes. The joint provides for the controlled use of cable under motion. Perpendicular outer mounting frames are joined by swaged cables that interlock at a center block. Ball bearings allow for the free rotation of the second mounting frame relative to the first mounting frame within a predetermined angular rotation that is controlled by two stop devices. The cables allow for compliance at the stops and the cables allow for compliance in six degrees of freedom enabling the duplication or simulation of the rotational movement and flexibility of a natural hip or knee joint, as well as the simulation of a joint designed for a specific robotic component for predetermined design parameters

User friendly joystick

A joystick control device having a lower U-shaped bracket, an upper U-shaped bracket, a handle attached to the upper U-shaped bracket, with the upper U-shaped bracket connected to the lower U-shaped bracket by a compliant joint allowing six degrees of freedom for the joystick. The compliant joint consists of at least one cable segment affixed between the lower U-shaped bracket and the upper U-shaped bracket. At least one input device is located between the lower U-shaped bracket and the upper U-shaped bracket

Forecasting in the presence of recent structural change

We examine how to forecast after a recent break. We consider monitoring for change and then combining forecasts from models that do and do not use data before the change; and robust methods, namely rolling regressions, forecast averaging over different windows and exponentially weighted moving average (EWMA) forecasting. We derive analytical results for the performance of the robust methods relative to a full-sample recursive benchmark. For a location model subject to stochastic breaks the relative MSFE ranking is EWMA < rolling regression < forecast averaging. No clear ranking emerges under deterministic breaks. In Monte Carlo experiments forecast averaging improves performance in many cases with little penalty where there are small or infrequent changes. Similar results emerge when we examine a large number of UK and US macroeconomic series

Compliant walker

A compliant walker is provided for humans having limited use of their legs and lower back. It includes an upright wheel frame which at least partially surrounds an upright user wearing a partial body harness. It is attached to the frame by means of cable compliant apparatus consisting of sets of cable segments and angle bracket members connected between opposite side members of the frame and adjacent side portions of the harness. Novelty is believed to exist in the combination of a wheeled frame including a side support structure, a body harness, and compliance means connecting the body harness to the side support structure for flexibility holding and supporting a person in a substantially upright position when the user sags in the frame when taking weight off the lower extremities

The real time mass evaluation system as a tool for detection of undeclared cascade operation at GCEPs

Given the flexibility of current cascade designs a real time mass monitoring system is preferred for safeguarding Gas Centrifuge Enrichment Plants. However, if such a system is to be installed in a GCEP it must not impinge on plant operation or be intrusive. Since load cells are already part of the operational process and located outside the cascade hall their exploitation for safeguards purposes is an obvious development. The paper describes, through dynamic simulations, how transients would be observed in real-time mass balances when undeclared cascade operation takes place in a declared facility

Cable compliance

The object of the investigation was to solve mechanical problems using cable-in-bending and cable-in-torsion. These problems included robotic contacts, targets, and controls using cable compliance. Studies continued in the use of cable compliance for the handicapped and the elderly. These included work stations, walkers, prosthetic knee joints, elbow joints, and wrist joints. More than half of these objects were met, and models were made and studies completed on most of the others. It was concluded that the many different and versatile solutions obtained only opened the door to many future challenges

Ti3SiC2-formation during Ti–C–Si multilayer deposition by magnetron sputtering at 650 °C

Titanium Silicon Carbide films were deposited from three separate magnetrons with elemental targets onto Si wafer substrates. The substrate was moved in a circular motion such that the substrate faces each magnetron in turn and only one atomic species (Ti, Si or C) is deposited at a time. This allows layer-by-layer film deposition. Material average composition was determined to Ti0.47Si0.14C0.39 by energy-dispersive X-ray spectroscopy. High-resolution transmission electron microscopy and Raman spectroscopy were used to gain insights into thin film atomic structure arrangements. Using this new deposition technique formation of Ti3SiC2 MAX phase was obtained at a deposition temperature of 650 °C, while at lower temperatures only silicides and carbides are formed. Significant sharpening of Raman E2g and Ag peaks associated with Ti3SiC2 formation was observed

Client Needs and the Design Process in Web Projects

The nature of Web systems is substantially different from more conventional software systems. They are developed in shorter timeframes, often act as the direct interface between multiple stakeholders, meet a more generic set of requirements, and generally serve a less specific user group. They are often developed very quickly from templated solutions, using coarse-grained authoring tools, and by the efforts of a multidisciplinary team. There is often considerable uncertainty on the part of the client as to their own requirements. The importance of defining the objectives of the system during the early stages of a project are generally acknowledged to be important, but access to the tools and templates can encourage developers to build too early. Often requirements are inadequately documented, or only emerge during development, or change as development proceeds. The immaturity of the industry and the lack of standardised processes in web development have been demonstrated by web-based solutions that in many cases fail to meet fundamental requirements. Specifications for Web systems are consequently very different from those for more conventional software systems. Apart from an increased emphasis on user interactions and the underpinning content, they also reflect a blurring of the boundaries between requirements, specifications and designs in the development process. In this paper we offer an iterative model for Web systems development that incorporates the user of partia

''One Passion, One Vision and One World’’- Reflections on the 9th Council of International Neonatal Nurses Conference (COINN) 2016

This is a pre-copyedited, author-produced PDF of an article accepted for publication in Journal of Neonatal Nursing following peer review. Subject to 12 months embargo period, embargo end date: 20 October 2017. The version of record [Journal of Neonatal Nursing (December 2016) Vol 22 (6): 258-262. First published online October 20, 2016] is available online at doi: http://dx.doi.org/10.1016/j.jnn.2016.09.007This report presents our reflections and feedback of the 9th Council of International Neonatal Nurses (COINN) conference 2016 that took place at the Westin hotel, Vancouver, British Columbia, Canada from August 13th to 17th 2016. This sophisticated venue overlooking a beautiful harbour captured the welcoming atmosphere and positivity that was to embrace the conference experience for the 4 day duration of ‘COINN 2016’. As you read this short article which describes the highlights and key messages from the conference, we invite the readers to hear the actual words from some of the first-time participants who stated that they will place the next ‘COINN 2019’ on their calendar with high anticipation.Peer reviewedFinal Accepted Versio